bootix ::: BootManage TCP/IP BOOT-PROM ::: Error Messages
 

BootManage® TCP/IP BOOT-PROM Error Messages

When the TCP/IP BOOT-PROM encounters a problem, it will display one of the error messages that are described in this chapter. TCP/IP BOOT-PROM error messages consist of an error code (e. g. M30) and a verbose message that describes the problem. Some Ethernet controllers have only a small amount of ROM space available (e. g. controllers with an 8 KByte ROM socket). On these controllers, only the error code is displayed, and you must look up the corresponding verbose error message in the following table.

Code Error Message Description
M10 ARP canceled by keystroke The ARP request has been canceled because the user pressed a key.
M11 ARP time-out occurred The ARP request has not been answered.
M20 Can‘t copy memory The System BIOS (int 15h, service 87h) was not able to copy data.
M21 Can‘t write to memory There is not enough memory to store all MTFTP packets.
M22 Can‘t write to memory The RAM memory is to low and reached the ROM range.
M30 Can‘t ARP tftp address The TFTP server did not answer the ARP request.
M31 TFTP open canceled by keystroke The TFTP open has been canceled because the user pressed a key.
M32 TFTP open time-out occurred The TFTP server did not answer or the TFTP daemon is disabled.
M33 Unknown TFTP opcode The TFTP server sends unknown packets.
M34 TFTP read canceled by keystroke The TFTP read has been canceled because the user pressed a key.
M35 TFTP read time-out occurred The TFTP server did not answer even that the open request was granted.
M36 TFTP write canceled by keystroke The TFTP write has been canceled because the user pressed a key.
M37 TFTP write time-out occurred The TFTP server did not answer even that the open request was granted.
M38 Can‘t open TFTP connection The TFTP server did not answer or is disabled.
M39 Can‘t read from TFTP connection The TFTP server did not answer even that the open request was granted.
M40 BOOTP canceled by keystroke The BOOTP request has been canceled because the user pressed a key.
M40 DHCP canceled by keystroke The DHCP request has been canceled because the user pressed a key.
M41 BOOTP time-out occurred The BOOTP server did not answer, is disabled or has no entry for this client.
M41 DHCP time-out occurred The DHCP server did not answer, is disabled or has no entry for this client.
M42 No client or server IP The BOOTP request was answered but did not contain a client or server IP.
M43 No bootfilename The BOOTP request was answered but did not contain a filename because the file does not exist or is unreadable.
M50 FFRAME canceled by keystroke The RPL FIND FRAME command has been canceled because the user pressed a key.
M51 FFRAME timeout occurred The RPL FIND FRAME command has not been answered.
M52 SFREQUEST canceled by keystroke The RPL SEND FILE REQUEST command has been canceled because the user pressed a key.
M53 SFREQUEST time-out occurred The RPL SEND FILE REQUEST command was not answered even that the FILE FRAME command was granted.
M6f System is locked! Press <Ctrl>-<Alt>-<Del> to reboot. The diskless boot failed and the system is now locked.
M70 Canceled by keystroke The checksum procedure has been canceled because the user pressed a key.
M80 RARP canceled by keystroke The RARP request has been canceled because the user pressed a key.
M81 RARP time-out occurred The RARP request has not been answered.
M82 No client IP The RARP request has been answered but did not contain a client IP.
M90 Can’t init controller for multicast Failed to re-initialize the network controller to receive multicast packets.
M91 MTFTP open canceled by keystroke The MTFTP open has been canceled because the user pressed a key.
M92 MTFTP open time-out occurred The MTFTP server did not answer or the TFTP daemon is disabled.
M93 Unknown MTFTP opcode The MTFTP server sends unknown packets.
M94 MTFTP read canceled by keystroke The MTFTP read has been canceled because the user pressed a key.
M95 MTFTP read time-out occurred The MTFTP server did not answer even that the open request was granted.
M96 Can’t ARP mtftp address The MTFTP server did not answer the ARP request.
M98 Can‘t open MTFTP connection The MTFTP server did not answer or is disabled.
M99 Can‘t read from MTFTP connection The MTFTP server did not answer even that the open request was granted.
M9a Too many MTFTP packets The MTFTP server is sending more packets as can be stored.
E60 ROM disabled via setup The network controller setup disables the ROM.
E61 Keystroke BOOT-PROM aborted The TCP/IP BOOT-PROM has been aborted because the user pressed a key.
E62 Can‘t init controller (???) The network controller can not be initialized.
E63 Can‘t init controller (i/o port) The network controller can not be found.
E64 Can‘t init controller (shm) The network controller’s shared memory can not be set.
E65 Can‘t init shm (using 0xd0000) The network controller’s shared memory is forced to 0xd0000.
E66 Can‘t init controller (shm) The network controller’s shared memory can not be set.
E67 Can‘t init controller (???) The network controller can not be initialized.
E68 Can‘t init controller (MC-ID) The network controller can not be found in any MCA slot.
E69 Can‘t init controller (shm) The network controller’s shared memory can not be set.
E6a ROM not licensed to this controller The network controller’s MAC address is not the same as the one the ROM is licensed to.
E6b Can not find RPL server The RPL server did not answer.
E6c Can not find RARP server The RARP server did not answer.
E6d Can not find BOOTP server The BOOTP server did not answer.
E6e Can not start from RAM disk image The RAM disk image does not contain a valid bootsector.
E71 Invalid checksum The RAM disk image does not have a valid checksum.
E72 Unknown boot protocol No boot protocol (DHCP/BOOTP/RARP/RPL) has been configured.
T?? <TFTPD error string> A TFTP error occurred, ?? holds the TFTP error code.

 

Impressum | Datenschutz